2162次
2020-04-29
国别 |
标准号 |
中文题名 |
英文题名 |
中国 |
GB 7543-2006 |
一次性使用灭菌橡胶外科手套 |
Single-use sterile rubber surgical gloves |
GB 10213-2006 |
一次性使用医用橡胶检查手套 |
Single-use medical rubber examination gloves |
|
GB/T 21869-2008 |
医用手套表面残余粉末的测定 |
Medical gloves.Determination of removable surface powder |
|
GB/T 21870-2008 |
天然胶乳医用手套水抽提蛋白质的测定. 改进Lowry法 |
Medical gloves made from natural rubber latex.Determination of water-extractable protein using the modified lowry method |
|
GB 24786-2009 |
一次性使用聚氯乙烯医用检查手套 |
Single-use medical poly (vinyl chloride) examination gloves |
|
GB 24788-2009 |
医用手套表面残余粉末、水抽提蛋白质限量 |
Limit for the removable surface powder and water-extractable protein of medical gloves |
|
YY/T 0616.1-2016 |
一次性使用医用手套.第1部分: 生物学评价要求与试验 |
Medical gloves for single use.Part 1:Requirements and testing for biological evaluation |
|
YY/T 0616.2-2016 |
一次性使用医用手套 第2部分: 测定货架寿命的要求和试验 |
Medical glove for single use.Part 2:Requirements and testing for shelf life determination |
|
YY/T 0616.3-2018 |
一次性使用医用手套 第3部分: 用仓贮中的成品手套确定实际时间失效日期的方法 |
Medical gloves for single use.Part 3:Determination of real time expiration dating of mature medical gloves stored under typical warehouse conditions |
|
YY/T 0616.4-2018 |
一次性使用医用手套 第4部分: 抗穿刺试验方法 |
Medical glove for single use.Part 4:Test method for the puncturation resistance |
|
YY/T 0616.5-2019 |
一次性使用医用手套 第5部分: 抗化学品渗透 持续接触试验方法 |
Medical gloves for single use Part 5: Test Method for Permeation of Chemicals under Conditions of Continuous Contact |
|
CNS 12543-1997 |
外科手術用橡膠手套 |
Surgical rubber gloves |
|
CNS 12837-1991 |
一般医疗用聚氯乙烯手套 |
Polyvinyl Chloride Medical Gloves |
|
CNS 12838-1991 |
一般医疗用聚氯乙烯手套检验法 |
Method of Test for Polyvinyl Chloride Medical Gloves |
|
国际 |
ISO 11193-1-2008 |
一次性医用检验手套. 第1部分: 橡胶乳胶或胶液制手套规范 |
Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution |
ISO 11193-1 AMD 1-2012 |
一次性医用检验手套. 第1部分: 橡胶乳胶或胶液制手套规格.修改件1 |
Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution; Amendment 1 |
|
ISO 11193-2-2006 |
一次性医用检查手套. 第2部分: 聚乙烯(氯乙烯)制手套规范 |
Single-use medical examination gloves - Part 2: Specification for gloves made from poly(vinyl chloride) |
|
ISO 12243-2003 |
医用天然胶乳手套 用改性格雷法测量可水萃取的蛋白质 |
Medical gloves made from natural rubber latex determination of water-extractable protein using the modified lowry method first edition |
|
ISO 21171-2006 |
医疗专用手套.可移动表面粉末的测定 |
Medical gloves - Determination of removable surface powder |
|
欧洲 |
EN 455-1-2000 |
一次性医用手套. 第1部分: 无孔试验和要求 |
Medical gloves for single use. Part 1: Requirements and testing for freedom from holes |
EN 455-2-2015 |
一次性医用手套. 第2部分: 物理性能要求和试验 |
Medical gloves for single use - Part 2: Requirements and testing for physical properties |
|
EN 455-3-2015 |
一次性医用手套 第3部分:生物评定要求和试验 |
Medical gloves for single use. Part 3:Requirements and testing for biological evaluation |
|
EN 455-4-2009 |
一次性医用手套. 第4部分: 保质期测定要求和检验 |
Medical gloves for single use - Part 4: Requirements and testing for shelf life determination |
|
CEN/TR 16953-2017 |
一次性医用手套. 选择指南 |
Medical gloves for single use - Guidance for selection |
|
EN ISO 21171-2006 |
医疗专用手套.可移动表面粉末的测定 ISO 21171-2006 |
Medical gloves Determination of removable surface powder |
|
美国 |
ASTM D3578-2019 |
橡胶检验手套标准规范 |
Standard Specification for Rubber Examination Gloves |
ASTM D5151-2006(2015) |
检测医用手套漏孔的标准试验方法 |
Standard Test Method for Detection of Holes in Medical Gloves |
|
ASTM D5250-2019 |
医用聚氯乙烯手套的标准规范 |
Standard Specification for Poly(vinyl chloride) Gloves for Medical Application |
|
ASTM D6124-2006(2017) |
医用手套残余粉末的标准试验方法 |
Standard Test Method for Residual Powder on Medical Gloves |
|
ASTM D6319-2000a(2005) |
医用腈橡胶检验手套的标准规范 |
Standard Specification for Nitrile Examination Gloves for Medical Application |
|
ASTM D6319-2010 |
医用腈类检验手套的标准规范 |
Standard Specification for Nitrile Examination Gloves for Medical Application |
|
ASTM D6319-2019 |
医用腈检验手套规格 |
Standard Specification for Nitrile Examination Gloves for Medical Application |
|
ASTM D6355-1998(2003) |
医用手套人重复损害修补试验的标准试验方法 |
Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves |
|
ASTM D6977-2019 |
医疗检查用氯丁橡胶手套的标准规格 |
Standard Specification for Polychloroprene Examination Gloves for Medical Application |
|
ASTM D6978-2005(2019) |
医用手套对化疗药物渗透阻力的评价的标准操作规程 |
Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
|
ASTM D7102-2010 |
测定无菌医用手套上的内毒素的标准指南 |
Standard Guide for Determination of Endotoxin on Sterile Medical Gloves |
|
ASTM D7103-2018 |
医用手套评定的标准指南 |
Standard Guide for Assessment of Medical Gloves |
|
ASTM D7160-2016 |
医用手套有效期测定的标准实施规程 |
Standard Practice for Determination of Expiration Dating for Medical Gloves |
|
ASTM D7161-2016 |
测定典型仓库条件下存放的成熟医用手套实时有效期的标准实施规程 |
Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions |
|
ASTM D7907-2014 |
测定医用检查手套表面杀菌作用的标准试验方法 |
Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves |
|
ANSI/ADA 102-1998 |
牙医用无菌丁二烯手套 |
Non-Sterile Nitrile Gloves for Dentistry |
|
ANSI/ADA 103-2001 |
牙医用无菌增塑聚氯乙烯手套 |
Non-Sterile Polyvinyl Chloride Gloves for Dentistry |
|
英国 |
BS EN 455-1-2000 |
一次性医用手套 无孔要求和测试 |
Medical gloves for single use. Requirements and testing for freedom from holes |
BS EN 455-2-2015 |
一次性医用手套.物理性质的要求和测定 |
Medical gloves for single use. Requirements and testing for physical properties |
|
BS EN 455-3-2015 |
一次性医用手套 第3部分:生物评定要求和试验 |
Medical gloves for single use. Requirements and testing for biological evaluation |
|
BS EN 455-4-2009 |
一次性医用手套.第4部分: 测定货架寿命的试验和要求 |
Medical gloves for single use Part 4: Requirements and testing for shelf life determination |
|
BS EN ISO 21171-2006 |
医疗专用手套.可移动表面粉末的测定 |
Medical gloves - Determination of removable surface powder |
|
BS ISO 12243-2003+A1-2012 |
医用天然胶乳手套 用改良的半细胞法测定水可萃取蛋白质 |
Medical gloves made from natural rubber latex. Determination of water-extractable protein using the modified Lowry method |
|
BS PD CEN/TR 16953-2017 |
一次性医用手套. 选择指南 |
Medical gloves for single use. Guidance for selection |
|
德国 |
DIN 58133-2008 |
医疗压缩袜 |
Medical compression hosiery |
DIN EN 455-1-2001 |
一次性医用手套. 第1部分:密封性要求和检验 |
Medical gloves for single use - Part 1: Requirements and testing for freedom from holes; German version EN 455-1:2000 |
|
DIN EN 455-2-2015 |
一次性医用手套. 第2部分:物理特性用要求和试验.德文版本EN 455-2-2015 |
Medical gloves for single use - Part 2: Requirements and testing for physical properties; German version EN 455-2:2015 |
|
DIN EN 455-3-2015 |
一次性医用手套. 第3部分:生物评定要求和试验;德文版本EN 455-3-2015 |
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation; German version EN 455-3:2015 |
|
DIN EN 455-4-2009 |
医用手套一次性使用 第4部分:保质期确定的要求和测试; |
Medical gloves for single use. Part4: Requirements and testing for shelf life determination; German version EN455-4:2009 |
|
DIN EN ISO 21171-2006 |
医疗专用手套. 可移动表面粉末的测定 (ISO 21171-2006) |
Medical gloves - Determination of removable surface powder (ISO 21171:2006) English version of DIN EN ISO 21171:2006-08 |
|
法国 |
NF S97-004-2006 |
医疗专用手套. 可移动表面粉末的测定 |
Medical gloves - Determination of removable surface powder. |
泰国 |
TIS 1056.1-2013 |
一次性医用检查手套. 第1部分: 橡胶乳胶或橡胶溶液制手套规范 |
Single-use medical examination gloves part 1: specification for gloves made from rubber latex or rubber solution |
TIS 1056-2005 |
一次性医用检查手套. 第1部分: 橡胶乳胶或橡胶溶液制手套规范 |
Single.use medical examination gloves.part 1: specification for gloves made from rubber latex or rubber solution |
|
越南 |
TCVN 6343-1-2007 |
一次性医用检查手套. 第1部分: 橡胶胶乳或胶液制手套规范 |
Single-use medical examination gloves.Part 1: Specification for gloves made from rubber latex or rubber solution |
TCVN 6343-2-2007 |
一次性医用检查手套. 第2部分: 聚乙烯(氯乙烯)制手套规范 |
Single-use medical examination gloves.Part 2: Specification for gloves made from poly (vinyl chloride) |
|
其他国家 |
GOST EN 455-1-2014 |
一次性医用手套. 第1部分. 紧密性的测定方法 |
Medical gloves for single use. Part 1. Method for determination of tightness |
GOST EN 455-2-2014 |
一次性医用手套. 第2部分. 物理特性的测定方法 |
Medical gloves for single use. Part 2. Method for determination of physical-mechanical properties |
|
GOST R 52239-2004 |
一次性医疗检查手套. 第1部分: 橡胶乳胶或橡胶胶浆制手套规范 |
Single-use medical examination gloves. Part 1. Specification for gloves made from rubber latex or rubber solution |
|
GOST R 57397-2017 |
医疗检查用橡胶手套. 技术要求 |
Rubber examination medical gloves. Technical requirements |
|
GOST R 57402-2017 |
医用手套. 使用期限的测定 |
Medical gloves. Determination of expiration dating |
|
GOST R 57403-2017 |
医用聚氯乙稀手套. 技术要求 |
Poly(vinyl chloride) medical gloves. Technical requirements |
|
GOST R 57404-2017 |
医用手套. 质量评估指南 |
Medical gloves. Quality assessment guide |
|
SANS 11193-1-2010 |
一次性使用医用检查手套 第1部分:橡胶胶乳或橡胶溶液制成的手套规范 |
Single-Use Medical Examination Gloves Part 1: Specification For Gloves Made From Rubber Latex Or Rubber Solution |
|
SANS 15190-2016 |
医用手套 安全要求 |
Medical laboratories - Requirements for safety |
|
LST EN 455-1-2001 |
一次性医用手套. 第1部分:孔自由度试验和要求 |
Medical gloves for single use - Part 1: Requirements and testing for freedom from holes |
|
LST EN 455-2-2015 |
一次性医用手套. 第2部分: 物理特性的要求和检验 |
Medical gloves for single use - Part 2: Requirements and testing for physical properties |
|
LST EN 455-3-2015 |
一次性医用手套. 第3部分: 生物评价的要求和试验 |
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
|
LST EN ISO 21171-2006 |
医用手套表面残余粉末的测定(ISO 21171-2006) |
Medical gloves - Determination of removable surface powder (ISO 21171:2006) |
|
SNI ISO 11193.1-2010 |
一次性医用检验手套. 第1部分:用橡胶乳和胶液制成的手套规范 |
Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution |
|
SNI ISO 11193.2-2010 |
一次性医用检查手套. 第2部分: 聚氯乙烯制成的手套规格 |
Single-use medical examination gloves - Part 2: Specification for gloves made from poly(vinyl chloride) |
|
STN EN 455-1-2002 |
一次性医用手套. 第1部分: 指孔间自由度的要求和试验 |
Medical gloves for single use. Part 1: Requirements and testing for freedom from holes |
|
STN EN 455-2-2015 |
一次性医用手套. 第2部分: 物理特性的要求和检验 |
Medical gloves for single use - Part 2: Requirements and testing for physical properties |
|
STN EN 455-4-2009 |
一次性医用手套. 第4部分: 测定货架寿命的要求和试验 |
Medical gloves for single use - Part 4: Requirements and testing for shelf life determination |
|
ABNT NBR ISO 11193-1-2009/Amd 1-2015 |
一次性医用检验手套。第1部分:用胶乳或胶水制成的手套规范 |
||
ABNT NBR ISO 11193-1-2015 |
一次性医用检验手套 |
Single-use medical examination gloves |
|
ABNT NBR ISO 11193-2-2013 |
一次性使用的医疗检查手套 第2部分:由聚氯乙烯制成的手套 |
Single-use medical examination gloves Part 2: Specification for gloves made from poly (vinyl chloride) |
|
DS/EN 455-3-2007 |
一次性使用医用手套第3部分:生物学评价要求和测试 |
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
|
DS/EN ISO 21171-2006 |
医用手套可移动表面粉末的测定 |
Medical gloves - Determination of removable surface powder |
中科检测具备防护手套检测相关资质能力,能依据相关标准对防护产品进行检测,确保生产质量。如有这方面的业务需求,欢迎咨询工程师:13926209354(微信同号)。

检验检测认证服务机构。

整体技术解决方案。